Hi everybody been reading in this forum for a while.I have a fortec system from sadoun. Have not been able to get a signal from dish.motor elevation and dish elevation is right have moved the diah up and down and side to side still no signal. I put an old direct tv lmb on and now can get 110 119 but no others.will this lmb work for all satellites or not. ? thanks
no it is a circular lnb you need a linear ku lnb for most sats. what type of lnb came with your system. personaly I recommend the invacomqph-031 works on both linear and circular sats.the dish may need some fine tunning to receive the linear sats as their signal is weaker than the circular sats.
__________________
Rainman's Equipment
Undien 4600,DSR 922
Fortec Ultra, Satworks 3618
2 Fortec Mercury II
Fortec Classic NA
8.5' Orbitron polar C Ku dish
8.5' Birdview HH C Ku dish
100cm Fortec dish
90cm Fortec dish
2 DG-240 HH motors
Co Rotor II feed horn
Norsat 8515 C band lnb
Norsat 4506A Ku lnb
BSC-621-2 Lnbf
Invacom QPH-031 Lnbf
Invacom SNH-031 Lnbf
Fortec Fsku-v universal Lnbf
V-Box
Linear Mode
