Bought a fta system from sadoun a few weeks ago been reading and reading. I have had a lot of experence with c band dishes. I got the dish set up no problem but could not get a signal. I took the lmb of and stuck a old direct tv lmb on there now I get 110 119 148 but no others. Is that old direct tv lmb not the right frequency to get those other satellite channels. I no the lmb is bad just want to make sure something is not wrong with receiver. Thanks
Try to take that LNB and scan Nimiq at 91W, it has a strong signal. Then take off that circular LNB and put the Linear LNB on. Now set up the receiver for Galaxy 11 at 91 W, remember to set the LNB type for Standard.Set up to scan Galaxy 11. Loosen the nuts on the AZ/EL and move S -L -O -W -L -Y. I was able to do this today and lock on G11 no problem. Patience and adherance to instructions make all the diffrence. Hope this helps.Let the forum know how you make out.
.jpg){kind=avatar}
Linear Mode
