Help required!

[rtt3821]

I have a Invacom QPH-031 LNB and am having trouble receiving 119,121 and 91. 110 is OK. I'm not sure I have the LNB connected correctly. I have one circular (LNB 0) connected to the Diseqc #1 and the linear (LNB 1) connected to #2. LNB 0 set to AA and LNB 1 set to AB. Is this correct? Also how does one handle the skew angle with this LNB? Incidently, the dish is on a rotor. Help Please.

[rainman]

you need to give us more info type of receiver,dish size, latitude and longitude for you area. it sounds like your dish is not aligned correctly.

[rtt3821]

I have a Dreambox 500S, a 36X40 inch elliptical dish mounted on a SG2100 rotor. My location is 33.422 North and 111.822 West. Hope this is enough information. Thanks for the fast response.

[boroda1]

Originally Posted by rtt3821

Also how does one handle the skew angle with this LNB? Incidently, the dish is on a rotor.

Skew angle is handled by motor. In your situation,
I would first try only one LNB type, cyrcular. If you can see 119, 110 and 91, then fine, go for next step and connect linear. What are you planning to troubleshoot this?

[rainman]

what channels are you trying to receive.

[rtt3821]

Good advise, I'll try the circular first. I can receive 110 but even though I can scan 119, 91 and 82 and get a lock-on I can't get any reception. Another confusing thing is what's the difference between ;egacy and Dish Pro channels?

[vj9999]

Read the forum rules. If you are having issues with those satellites and you are a legitimate subscriber, the provider will be more than willing to help you.

If you are using equipment you suggest, it is more than obvious that you are trying to illegally get programming. This thread is closed!