Which Diseqc Switch To Get For Qph-031??

[sagirma]

Hi All,

I am thinking of purchasing the Invacom QPH-031, and it will be feeding signal to 2 recievers. Which switch should I get to go with this?

Do I get 2 of these? http://www.sadoun.com/Sat/Products/S...way-switch.htm

OR,

1 of these http://www.sadoun.com/Sat/Products/C...lti-Switch.htm

[rainman]

get 2 of the 2 way .
to do 2 receivers will also need a 22 khz switch.

[sagirma]

Thanks for the reply Rainman,

so I am trying to picture this out, I will have the LNB, C1/l1 ports going to one disec switch then to the motor then to Rec, and c2/l2 going to the second switch then to reciever #2, (correct me if I am wrong) where exactly am I gonna place the 22 khz switch? and can you please link me to which 22khz switch I should get exactly? Not asking for any spoon feeding so please excuse my ignorance just not very familiar with these switches.

I saw this thread but not sure if its of any help, or just makes it more confusing.

http://www.sadoun.net/forums/install...-lnb-type.html

and again, Thanks in advance...

[rainman]

I am sorry on that setup you won't need the 22khz switch I was thinking of something else.

[elgemcdlf]

You might want to consider buying two 4 place DiSeqC switches. Most of what I have seen is the 4 place are cheaper than 2. Or (2) 22mhz switches would accomplish the same effect.

Just some thoughts
Steve

[sagirma]

Rainman, elgemcdlf thanks for the quick replies, its always nice to have some sort of reliable source for confirmation.

once again thanks...

[rainman]

you are welcome.