|
|
|||||||
| Installation Support Post questions about installations issues. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
03-20-2006, 10:05 AM
|
|||
|
|||
|
FTA 36 inch dish w/motor
I have installed a 36 inch dish w/motor in Mimai Florida 33156.
I have already found T5ku, G10ku, AMC4, and SATMEX5. Does anyone know if their are other satellites with free channels that I could find in the arc from my location and the frequency's for those satellites. Thanks for any help. Johnny
__________________
I installed a fta 33 inch dish with a universal KuLNBF, Input freq 11.7-12.2 GHZ and output 950-1450 MHZ but I can\'t get any signal on Telstar5 at my location in Miami. I have my elevation set to 54.5 and 214 on the azimuth and I\'ve also tried changing LNBF frequency from universal 1 and universal 2 on my pansat 2500A fta receiver... 
|
|
03-20-2006, 10:10 AM
|
||||
|
||||
|
http://www.lyngsat.com/america.html Lots more to play with here!
__________________
Twinhan 1020A, Coolsat 5000, Pansat 3500S Panasonic 4500 10' C/Ku, 1 meter Winegard-QPH-031-Spaun 411F-SG2100
|
|
03-20-2006, 12:12 PM
|
||||
|
||||
|
Is the 33" dish motorized? If not you also need to set the skew for the LNB.
__________________
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator 8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5 Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100 Motorola DSR922 Fortec Mercury II Digital Stream HD1150.
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
.jpg){kind=avatar}
Linear Mode
