Im thinking of buying a QPH031Invacom LNBF, for my motorized dish. I have a t-55 using 3 ports on my disqc switch now, and motor on the other. using a 4 way disqc switch now. How can I hook up another input to this switch? I would have 5 inputs? Cause I need 2 from the QPH031
to get both circular and linear? I am using a Coolsat 4000 pro reciever. I am hitting 110, 119, and 91 on my T-55.
Why is your motor hooked to the DiSeqC? Should go from receiver in to motor. From motor to DiSeqC from DiSeqC to LNB unless I misunderstood.
As far as ganging multiple switches together. The input from one is the output from the next in the chain. Example you are running 2 switches. So you hook ports 1, 2, 3 to LNB's. Port 4 goes to the receiver port of the second switch and LNB 4 hooks to port 1. I beliieve there may be diagrams here at Sadoun.
Steve
__________________
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator
8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5
Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100
Motorola DSR922
Fortec Mercury II
Digital Stream HD1150.
Linear Mode
