Old LNB work?

Photobug · #1 (**permalink**) 02-15-2006, 09:32 PM

As an ex-DTV user I bought a new receiver. I was advised that my previous dish and LNB would work to get Dishnet 110. I have tried finding the DN 110 satellite to no avail. I get no indication of any receiver signal at all.

I downloaded an instruction that said I need to set the Elevation, Azimuth and Polarization Tilt.

First will this dish and LNB, work? Or should I buy a Dishnet dish? How do I set the Polarization Tilt or is it needed?

Second, I only have a single DTV LNB do I need a switch in the line?

Thanks for any help!

bobkat · #2 (**permalink**) 02-16-2006, 10:13 AM

I gather you are aware that the reception and decryption of DirecTv and DishNetwork signals is illegal in Canada.

kat

scarletcom · #3 (**permalink**) 02-19-2006, 07:38 PM

Need a little more info from you to help.What type of receiver did you purchase?If you bought an *** receiver what bin file are you using?A single LNB with only a single output does not require a switch..Feed us some more info and we can help get you pointed in the right direction.Edited my own post to prevent breaking the rules, please excuse the error on my part.