Fortec 90cm Dish Elevation

daveyard · #1 (**permalink**) 01-24-2006, 05:34 PM

Just bought and installed Fortec 90cm dish from Sadoun.
It is not clear which part of the nut or brass plate should line up with the elevation markings.
My elevation should be set at about 37.5 but there is no arrow or line on the opposing piece.
Should I assume that the center of the nut should line up between 30 and 40, or is it the top edge of the nut?
Thx!

rainman · #2 (**permalink**) 01-24-2006, 07:20 PM

go with the center of the nut. just remember you will have to make fine tuning adjustments to get best signal anyway. :mozilla_smile:

starman · #3 (**permalink**) 01-25-2006, 06:45 AM

Yup, center of the nut. Thats what I do here with my Winegard. There is no pointer to go by so using the center of the nut seems to work ok. Actually I watch the center of the bolt not the nut, but you get the idea.

daveyard · #4 (**permalink**) 01-25-2006, 10:57 AM

Thx you guys/gals are great!

rainman · #5 (**permalink**) 01-25-2006, 11:22 AM

Quote:

Originally Posted by daveyard

Thx you guys/gals are great!

you are welcome glad we could help. =D>