Help with installation of T90 without Back Mount Elevation!

johnydepp · #1 (**permalink**) 01-13-2006, 11:15 PM

Hi everybody,

I have a T90 Dish without any Back Mount Elevation and I am puzzled on how this could be installed. I bought the dish off ebay and the dish doesn't have the back mount Elevation now I am left with problems.

Could someone please let me know if this dish could be installed at all without the back mount Elevation and how easy it is to install it. I have all the installation details and aiming details from Wave Frontier already so no problems in that, but I have never installed a dish without the Elevation mount.

Thank you everybody...

rainman · #2 (**permalink**) 01-14-2006, 07:02 AM

Quote:

Originally Posted by johnydepp

Hi everybody,

I have a T90 Dish without any Back Mount Elevation and I am puzzled on how this could be installed. I bought the dish off ebay and the dish doesn't have the back mount Elevation now I am left with problems.

Could someone please let me know if this dish could be installed at all without the back mount Elevation and how easy it is to install it. I have all the installation details and aiming details from Wave Frontier already so no problems in that, but I have never installed a dish without the Elevation mount.

Thank you everybody...

you could use an angle finder to set your angle but if the dish has no piviot you will have to rigg up something to acheive proper angle.

johnydepp · #3 (**permalink**) 01-14-2006, 04:27 PM

Thanks for the info, I wanted to know how the angel finder is used and where should it be placed to find the right Elevation for the Satellite. If you see the T-90 dishes pictures on Sadoun's website, it shows that these T90 don't come with an Elevation back mount but they come with a different type of nuts and bolts setup and finding the elevation is harder on them.

Thanks for the info and if you could please have a look at one of the pictures and tell me where it is placed I would appreciate it.

Thank you

rainman · #4 (**permalink**) 01-16-2006, 07:07 AM

the threaded rod adjust's the angle. to use the angle meter use a 2x4 across the face of the dish with angle finder to check the angle. :mozilla_smile: