Cascade Multiple 4x1 DisEqC to receive multiple satellites??

[Satellite]

Would it be possible to cascade multiple DisEqC switches to one recevier? I have two 4x1 DisEqC switches, and I want to watch 7 satellites. Can I cascade these switches using the following schem

LNB1 to switch 1, port 1
LNB2 to switch 1, port 2
LNB3 to switch 1, port 3
LNB4 to switch 1, port 4
Output of switch 1 to switch 2, port 1
LNB5 to switch 2, port 2
LNB6 to switch 2, port 3
LNB7 to switch 2, port 4
Output of switch 2 connect to the FTA receiver.

If possible, how can I set the control in the FTA receiver?

Thanks for your help.

[rainman]

be alot easier to have one dish with a motor,

[Sadoun]

You can't do that. It is best to add a 22KHz tone switch and connect the 2 DiSEqC switches to the 22KHz switch. The output on that switch goes to the receiver.