fINDING amc3

[eian]

DO I NEED A MOTOR TO LOCATE AMC3
HAVE A PANSAT 2500A
80CM DISH
.3 LNBF

SIGNAL IS 76% CAN'T GET ANY HIGHER NEED HELP BAD

[kevision]

No you don't need a motor, you just need to point the dish in the right place.

Press MENU, then INSTALLATION
password is 0000

ANTENNA SETUP

select AMC3 and press OK

your settings should be:
Universal 1
DiSEqC OFF
Skew 45
TP 12180V 29.270 (if this isnt available you'll need to add it in your TP list. ask if you want to know how to do this)
Positioner setting: Disable
Satellite Scan: FTA
press EXIT to back out to the video screen and press 'SIG' twice. This meter is labeled "signal strength" but is in fact a quality meter. please ignore all other signal meters. quality is the only one that will tell you anything.

At this point we are stuck because you have not indicated where you live. Once we know that, we can tell you where to point. Or you can look it up yourself:
http://www.sadoun.com/Sat/Installati...Calculator.htm