I have a couple questions regarding my setup. I have the
T90 mounted to a pole. The pole is plumb. Using the setup instructions from WaveFrontierI have the following results:
With AMC 4, 110 Dish, 119 Dish and 91W ExpressVu I have 99%-100% signal. I am using a
Birdog to calibrate. I am doing each LNB seperately without switches. On AMC 3 I am only able to get 45%-50%. On 123W I am getting 121W on the Birdog. No matter how much I try I cannot get any better on the latter 2 satellites. I am using Fortec Star FSKU 2U Universal twin LNBF's for the set ups. I am in the southeast Michigan area. Any guidance or suggestions would be most helpful.
Linear Mode
