I have an SR3200 reciever, and wanted to slave it to my 4DTV. I have a dual C-Band LNB so I don't need a servo motor, I would like to hook up the SR3200 and see if there is anything of the FTA type that can be seen over this reciever. Is this possible? And how would I hook it up? My Dual has one permenant V LNB, and a Permenant H LNB, how do I hook it up to the main reciever?
I have an SR3200 reciever, and wanted to slave it to my 4DTV. I have a dual C-Band LNB so I don't need a servo motor, I would like to hook up the SR3200 and see if there is anything of the FTA type that can be seen over this reciever. Is this possible? And how would I hook it up? My Dual has one permenant V LNB, and a Permenant H LNB, how do I hook it up to the main reciever?
Just use your other C-band coax in place of the Ku feed. If your receiver allows, use the 22KHz switch for your system. Program your receiver to turn 22KHz on for one polarity and off for the other. You will have to scan each sat twice, once with each polarity.
Linear Mode
