|
|
|||||||
| Installation Support Post questions about installations issues. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
09-27-2009, 09:56 PM
|
||||
|
||||
|
V3000 Gbox
getting ready to put in a 12ft Dish (freebie)
 was going to purchase a V3000 gbox to move the actuator. Can anyone tell me if this will use the USALS commands from the RX ?? Or do I have to program it manually. Thanks
__________________
"People who drink light 'beer' don't like the taste of beer; they just like to pee alot." -Capital Brewery, Middleton, WI 
|
|
09-29-2009, 02:38 PM
|
||||
|
||||
|
It will use the receiver commands to store and locate the sats. I don't rememeber if it will be Diseqc only or both Diseqc and USALS.
__________________
VA 39N, 78W, Mercury II, Fortec 31", 36", 72", SG2100, DG-280, H180 (two DSR-922's sitting in a closet and to be the next project) HDTV TV with no pay tv.
|
|
10-01-2009, 10:07 PM
|
||||
|
||||
|
it only use the disqec commands.
__________________
Rainman's Equipment Undien 4600,DSR 922 Fortec Ultra, Satworks 3618 2 Fortec Mercury II Fortec Classic NA 8.5' Orbitron polar C Ku dish 8.5' Birdview HH C Ku dish 100cm Fortec dish 90cm Fortec dish 2 DG-240 HH motors Co Rotor II feed horn Norsat 8515 C band lnb Norsat 4506A Ku lnb BSC-621-2 Lnbf Invacom QPH-031 Lnbf Invacom SNH-031 Lnbf Fortec Fsku-v universal Lnbf V-Box I Like To Shop at Sadoun Satellite Sales.www.sadoun.com
|
|
10-02-2009, 02:05 PM
|
||||
|
||||
|
Yeah... Disqc only. It is a nice feature though. The receiver does signal the Vbox to move, so when you fine tune in the Disqc mode you can save your position. Then when you change channels the receiver tells the Vbox to move to the appropriate position. Very nice and automatic after you set each satellite.
__________________
VA 39N, 78W, Mercury II, Fortec 31", 36", 72", SG2100, DG-280, H180 (two DSR-922's sitting in a closet and to be the next project) HDTV TV with no pay tv.
|
|
10-02-2009, 05:43 PM
|
||||
|
||||
|
OH well
Glad to know it will work. I have been using my dsr920 to move the dish. What i think i am going to do is do away with the corrotor 2 and go with a bsc621 I think they will make one that will work with the 4DTV RX. There are a few DS2 channels that are in the clear that i like to watch plus I just got done changing the battery on my dsr920
 . I have a separate system for Ku. My Fortec dynamic and sg380 motor with fortec 90cm dish. I plan on using the 12 footer for cband only and my 8 footer for a Ku band dish and to experiment with.
__________________
"People who drink light 'beer' don't like the taste of beer; they just like to pee alot." -Capital Brewery, Middleton, WI
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
