Dish 1000.2 Dish 1000 plus

m2dmhot · #1 (**permalink**) 05-14-2007, 09:10 PM

I have a few questions first can i point a 30" dish at 118.7 and receive programing if so what kind of lnb and dish do i need i currently have 119 and 110 can i input the 118.7 into my dp34 or does it have to be a dpp44
also can i input the 118.7 feed into a dish 1000.2...
Thanks In Advance
Regards
m2dmhot

m2dmhot · #2 (**permalink**) 05-15-2007, 04:22 PM

Wow no one knows the asnwer hurmph

pictureon · #3 (**permalink**) 05-15-2007, 08:05 PM

The 118.7 satellite is a FFS satellite but it's circular satellite. You have to use the dishnetwork lnb that comes with dish 500+ and dish 1000+ Best thing to do it]s to upgrade to dish 500+

m2dmhot · #4 (**permalink**) 05-16-2007, 07:38 PM

Can you just pick up the 118 by itself?? If so what hardware is required there must be another way hte 1000 plus is too expensive

pictureon · #5 (**permalink**) 05-17-2007, 02:58 AM

Then you'll have to figure a way to mount the lnb to the dish you'll be using. The LNB is not cheap either. Are you sure you need to get satellite 118.7? your channels might be available on 61.5 or 148.