|
GlobeCast LNBF with Made in Japan on body
Some GlobeCast LNBFs that have "Made in Japan" printed on it have an issue with the polarity. You will need to adjust the polarity on that LNBF by 90 degrees. You can do that by loosening the 4 screws holding the LNBF to the skew plate. Turn the LNBF 90 degrees (either direction), then re-tighten the screws. That should fix the polarity issue with these LNBFs.
__________________
Best regards, Sadoun Satellite Sales
US Sales info: 1-888-519-9595 or, 1-614-529-9560
____________________________________
|
.png){kind=avatar}
Linear Mode
