Using BSC621-2 C/Ku LNBF

[pmb1010]

OK whats the trick to receive WB on G11?
WBDVB26700-3/4


I put in 3720H, and 26700 and it shows some reception of signal.
But no matter if I put in FTA, or ALL, it comes up with "no channels found".

[elgemcdlf]

OK whats the trick to receive WB on G11?
WBDVB26700-3/4


I put in 3720H, and 26700 and it shows some reception of signal.
But no matter if I put in FTA, or ALL, it comes up with "no channels found".

Ah the secret of the WB. For $50.00 I will tell you how to get all the WB channels there. Ok you can owe me You have to manually enter the PID info. No idea why but if you manually enter all the pid info you will get them. I think there are 3 channels there if I remember right. One is a feed. Maybe more.

[pmb1010]

OK so manual PID info.
Not sure how thats done on an Ultra.
Surprized blind scan didn't find it and figure that out...

Anybody know - how does one put in PID info in an Ultra?

[elgemcdlf]

OK so manual PID info.
Not sure how thats done on an Ultra.
Surprized blind scan didn't find it and figure that out...

Anybody know - how does one put in PID info in an Ultra?

I have a Platinum but in it there is a manual scan screen and within that area you can enter the info. I have 3 different makes of receivers and all are the same concerning that tp. I have seen other posts with the same response so I believe it is something in the tp itself.

[elgemcdlf]

Find it yet? I want to know you have C Band WB Then you too can charge $50.00 to tell others how it is done.

[pmb1010]

I found it under Advanced Scan.

I cant read the menus on this 3" tv. Lasik ruined eyes....

OK, put in the info from lyngsat, and for PID (I guess) it's 101, 102.

Still, "0 programs found".

-=======
edit.. GOT IT.
Putzing with the values, it popped in. Frustrating, but fun.

C band is neat.

--------------

edit 2 - blah... wrong audio for the picture shown... LOL !!!!
Gotta hit the sack, up early tomorrow. Will report further results tomorrow afternoon on this project.

PMB

[elgemcdlf]

It then asked you if you want to add the channel anyway. You said yes and then checked to see if it was there Oh yes and renamed it after you confirmed it was there.

Yes entering 101 for VPID and 102 for APID should have gotten you WB East. Now do it all over again with 201 and 202 and then with 301 and 302. You should now have 3 WB channels. Of course you have renamed them because they were saved as something cool like Channel 1

[elgemcdlf]

There are a couple good channels on G10R also. They scan right in though. WB is the only one that makes you go through all this Good to know you have it figured out. Have a great night.

[pmb1010]

Carlisle, IN?

We have a plant in New Carlisle, IN.
Fly into South Bend a bunch of times a year.
Going Aug 15/16/17 as a matter of fact.

I think you are more in central IN, right?

[rainman]

OK so manual PID info.
Not sure how thats done on an Ultra.
Surprized blind scan didn't find it and figure that out...

Anybody know - how does one put in PID info in an Ultra?

use the advance scan mode.