LinkBack URL
About LinkBacks
View Profile
View Forum Posts
Private Message
Reply With Quotehttp://www.lyngsat.com/america.html Lots more to play with here!
I have installed a 36 inch dish w/motor in Mimai Florida 33156.
I have already found T5ku, G10ku, AMC4, and SATMEX5.
Does anyone know if their are other satellites with free channels that I could
find in the arc from my location and the frequency's for those satellites.
Thanks for any help.
Johnny
I installed a fta 33 inch dish with a universal KuLNBF, Input freq 11.7-12.2 GHZ and output
950-1450 MHZ but I can\'t get any signal on Telstar5 at my location in Miami. I have my elevation set to 54.5 and 214 on the azimuth and I\'ve also tried changing LNBF frequency from universal 1 and universal 2 on my pansat 2500A
fta receiver...
.jpg "starman's Avatar"){kind=avatar}
http://www.lyngsat.com/america.html Lots more to play with here!
Twinhan 1020A, Coolsat 5000, Pansat 3500S Panasonic 4500
10' C/Ku, 1 meter Winegard-QPH-031-Spaun 411F-SG2100
Is the 33" dish motorized? If not you also need to set the skew for the LNB.
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator
8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5
Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100
Motorola DSR922
Fortec Mercury II
Digital Stream HD1150.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions 
