New Pictures: 100CM dish

[pictureon]

The bolts you see are used with concrete floors. If you have a wooden platform, use lag screws.

How do they work on concrete? I could not figure out.

[Salukian]

When attaching to concrete, I suggest you pre-drill your holes using a hammer drill and a masonry drill bit. Use a smaller screw gun to attach masonry bolts/screws. Then, HAND turn the bolts (with a screw driver... the old fashioned way) for the last few turns.

Oh, and I like the movie. Especially the part with the girl. She's cute.

http://www.sadoun.net/videos/Sadoun1Mini.wmv

[sagirma]

That is a HOT mini movie, ..... LOVE IT

[reho33]

What ever happened to the photos of a 100 CM dish and someone outside of the Sadoun HQ using a Sathawk showing the signal and picture quality? Tried to find it on forums and no luck.

[carl066]

I've just installed my 100-cm Fortec. Was hoping that there would be some sort of threaded fine adjustment in the vertical plane, but no. The 75-cm Star Choice dish has such an adjuster. If the vertical setting you are adjusting around is less than 40 degrees, there will be a tendency for the dish to sag down, once you've loosened the two bolts. I added a couple of beefy turnbuckles attached to the bottom mounting bracket and connected to the main mast via U-bolts. Works great and only cost a few bucks. Too bad Fortec couldn't come up with something similar.

[Admin]

We still have a few 100cm dishes in stock and these are going fast. If you need one, click on FC100CM 100CM Offset satellite Dish Ku Offset Antenna