KLB1 Issue

[hanoos]

I'm having an issue with KLB1 ,, I have birdog meter and never been able to detect it either on 97w or 93 w neither vertical or H..

I wish anyone have experince with it may advice!

Is it compatible with Birdog version 3 USB.

[Sadoun]

Turn DiSEqC in BIRDOG.

Check http://www.sadoun.com/Sat/Products/S/KLB1-S2.jpg

If you don't know how, then just use a standard LNBF like the KUL1 to align the dish on 97W, then switch LNBFs. Skew the KLB1 to capture signal for second satellite.

[hanoos]

I would love to know how to turn DISEQ on on my birdog.

That Will be the best help to me

Thank You

Update: I been searching and I found some helpful post as follow:


If you pres OFF and hold for 3 seconds it will bring this menu:
>Exit
Backlight ON
Clicking OFF
Sleep 6 Mins
Defaultd
English
RF dBuV / Liner ( I really don't know wat this dos?! )
Found / BER=x.xxE-x ( I really don't know wat this dos?! )
Ber Log/Liner ( I really don't know wat this dos?! )


If you pres ON & ">" will bring on displey this:
>DiSE*c LNB A
DiSE*c LNB B
DiSE*c LNB C
DiSE*c LNB D

If you pres ON and OFF, you will have this options:
> Exit
LNB / 65,535 or 10,75
Defaults


I think my LNB is not good, it gives me Signal power at 34!
I bought the INVACOM LNB on ebay :^o


is this is what i'm looking for to get the birdog to detect the duo LNB


THanks