We have a small resort , what I would like to do is receive FTA programming from Galaxy 10R . We have 4 cabins close together, maximum 400 ft apart. Because of terrain and tal trees, I believe I can get Galaxy 10R at one cabin only, without too much trouble. Is there a wireless device which would allow the other 3 cabins to receive programming from that receiver without phone line or co-ax, just wireless? If this is possible, what equipment would I need? Thank you for any help, much appreciated.
New to FTA
Assuming that you'll be able to sign the appropriate agreements with all of the providers to allow you to redistribute the signal (doubtful since most of what's up there is intended for specific markts), your best bet is still to go with RG11 (or RG6 with good amps, or a distribution system modulating all changes on your rg6 drop) between the main drop and the cabins.
Since you've ruled that out, my second choice would probably be to obtain some relatively decent quality uhf video transmitters (I use a decent one that does a max of 500 feet, and can be modulated to transmit on any channel from ch14 to ch31 in the uhf band). Then get some decent quality uhf remote control extenders to connect to the 3 remote boxes. Tune the TV in each cabin to the corresponding frequency of the UHF transmitter connected to the appropriate fta receiver, and you're set.
I like to shop at Sadoun Satellite Sales
Dishes: 2 Primestar 75E, 2 Fortec 90cm, 2 10ft, 7.5ft
Motors: 2 SG2100, SkyJack 24" & 36" actuators
Movers: 2 VBoxII
LNB(f)s: Invacom qph-031, Primestar, dual/single ku, BSC621,Geosat dual C-Band, 2 Polarotor, Corotor
DVB Receivers/cards: 2 Fortec Classic NA, 2 Dreambox 500-s, SatPros DSR-550s, Digiwave DG7000, Lava 3200, Pansat 2500a, Viewsat Ultra, Twinhan 102g
Analog: Zenith 1000, GI 2400
There are currently 1 users browsing this thread. (0 members and 1 guests)