LNB for Dish Network

Sandyhook · #1 (**permalink**) 02-01-2005, 07:27 PM

which LNB to use with KTI 18" dish in order to receive 110 or 119 satellites provided that my old receiver is not compatible with dishpro or dish 500

thecableguy · #2 (**permalink**) 02-02-2005, 07:56 AM

all dish receivers are compatible with 500 dishes just the lnbs are imprortant.
you need a legacy duel for an 18 inch dish 300. A 500 dish will work with 2 legacy duels and one Sw 21 switch, or you can use a legacy twin.

Sandyhook · #3 (**permalink**) 02-02-2005, 05:36 PM

Thanks
Is that means the dish I have which receives 61.5 sat can be redirected to receive 110 or 119 sats?

thecableguy · #4 (**permalink**) 02-03-2005, 08:42 PM

To get the 61.5 the 100 and 119. You will need to point a single dish. Either the 300 or 500 with one legacy duel lnb will work at the 61.5.
And you will have to point a 500 dish at the 100 and 119, using a legacy twin Take one coax off the twin and one coax off the duel and put them in a legacy 21 switch. then take the line out of there to your receiver. You will then receive all 3 satellites.