Linear KU LNB for Dish Network

manner1 · #1 (**permalink**) 10-05-2004, 08:21 PM

I was wondering if sadoun sells just the linear LNB for dish network for sat 105 or 121. The reason I am asking is that I would like to receive 121W with my DP301 receiver instead of having to point to 61.5 and end up with one dish. I do not want to invest into a superdish. I would like to purchase a T90 and add this lnb to that dish. Thisa way I can also add my FTA at 97W to this dish as well.

I tried my standard linear FTA KU LNB and does not work with my DP301. Any thoughts or ideas would be greatly appreciated. Or can anypone point me in the right direction on this topic.

Thanks,

Manner1

jcarva · #2 (**permalink**) 10-09-2004, 08:41 AM

DN and DTV use circular polarity, FTA uses linear, there is no LNBF that will do both.

dtsexpert · #3 (**permalink**) 10-09-2004, 11:38 PM

You mis-read the message. DishNEt does have 2 sats which use linear, located at 105 and 121.
Michael

Quote:

Originally Posted by jcarva

DN and DTV use circular polarity, FTA uses linear, there is no LNBF that will do both.

manner1 · #4 (**permalink**) 10-11-2004, 08:19 AM

All I am asking is whether sadoun sells the linear LNB as a stand alone or not. The lnb would be the same one used on the 105 setup.

Manner1

ctg101 · #5 (**permalink**) 10-11-2004, 07:18 PM

Quote:

Originally Posted by manner1

All I am asking is whether sadoun sells the linear LNB as a stand alone or not. The lnb would be the same one used on the 105 setup.

Manner1

yea, the universal lnbf would work