Putting together TWO DISHES and ONE CABLE in a Single cable
I need to put together two antenas for sat 110, 119 and my CABLE FEED Together to run through one single cable line inside the house to 4 separate televisions with 4 independent receivers!!! Can You tell me what equipment do I need to make it work with my dishnetwork?
Sure, you need an SW44 multiswitch and 8 diplexers and a 4-way splitter for the cable TV feed. Just take 4 cable TV feeds and feed them into 4 diplexers on each output from the SW44; then take 4 more diplexers and feed the cable TV back out in each room where the DishNet receivers are located. I'll try to dig up a wiring diagram to illustrate this.
kat
__________________
For as much as I like to help out our members I simply do not have time to answer Private Messages or emails asking about setup and other general issues. Please post your questions in the forums and we will try to help you out. Thanks.
Here is the diagram. Note that you need 4 separate wires coming from the dish to the SW44 multiswitch - so that means 4 wires coming into the house -- no way to get everything on one cable as you want. Not possible. In the diagram the one dish says "61.5 or 148" but it works the same for 110.
__________________
For as much as I like to help out our members I simply do not have time to answer Private Messages or emails asking about setup and other general issues. Please post your questions in the forums and we will try to help you out. Thanks.
Linear Mode
