I hooked up my wineguard 33 inch dish with a sg 2100 motor the lnb is a invacom qhh-31 for circular and linear i ran the 2 rg6 cables from the lnb to the 4x1 diseqc one cable from the circular went to port 1 and the second cable went to port 2 --- how do i set this up in my antenna setup do i make diseqc to off on both port 1 and port 2 ??? thanks for any help.
No, DiSEqC should be set up for each satellite individually: for satellite with circular pol-n set it in Antenna Setup as "Port1"/"PortA", for satellite with linear - set it's DiSEqC to "Port2". Should not be "Off".
Linear Mode
