Using DiSEqC switch with HH Motor

[Sadoun]

If you are going to use an HH Motor and a DiSEqC switch, we recommend you position the DiSEqC switch after the Motor as follows:

Receiver ----- HH Motor ----- DiSEQC switch ---- LNBFs

If you place the DiSEqC switch between the Receiver and the HH Motor, it will impact the performance and operation of the HH Motor.

[rainman]

very good info Sadoun.

[rcdif]

OK just fried a stitch running the motor lead through it. If I read what you are saying right you should go from the receiver to the receiver terminal on the motor then from the lnb terminal on the motor to the receiver terminal on the switch, I guess all the lnb leads should go to the 1-2-3-4 switch terminals. Am I looking at the right way?

[rainman]

yep thats the way you want to go.

[Kbron2000]

Can I have 2 receivers on 1 motor ???? How do I connect them?