Fortec Star Dynamic

[mvr600]

Hello everybody, Thanks to your help I recently install my 33" dish with my fortec star dynamic, pointing to 97W, and my wife now is watching her Thai channels, (Some). My question is what is the maximum quality that I can get from Galaxy 97W. It looks like anything that I do my quality keeps fluctuating between 36% and 50%, and some days I loose 2 different channels. Can I get stronger signal with an inline amplifier, do they work? or just be happy with what I got.

[William Eng]

Loosen the LNB and slowly turn it clockwise or counterclockwise. You can peak the signal while you are watching the signal bar.

I'm in Florida, and 97W comes in at 60% to 80%.

[mvr600]

So I guess we can't get 100% quality. Do you know if the inline amplifier works? Thnak you!

[rainman]

So I guess we can't get 100% quality. Do you know if the inline amplifier works? Thnak you!

not recommend unless your cable run is over 100 feet.also remember while it amplifies the signal it also increase noise so you may not get a better signal best way to improve signal is to make sure your dish is at it's peaked or go to a larger dish.

[spongella]

Have the same setup as you.

I run about 75 feet of RG/6 with an inline amp (probably not needed) and the best I can get is around 48 - 52% signal quality, and it never stays steady, fluctuates.

I also notice that you can different signal quality depending on the transponder.

The best sig. qual. I have gotten among the sats is about 68 - 72%. Interestingly, some that are 28 - 29% quality still come in fine, no signal freeze, breakup, etc.

[branson]

hello my position is 37.6 N 122.4 W i am seting up my fortec dynamic system but i am having problem with 97w and 123 w i dont know if is the
reception or the setup i will apreciate some help in this problem. i got s and q in 110 w and 91 w no idea what is the problem