Fortec Mercury II >>> DYNAMIC

[branson]

i hit 97w galaxy 25 but i have only 25-29 q i try to adjusted and still the
same do i need another dish a 120cm, or a diferent lnb my is aviacom i buy the system from sadoun i don't know what to do know i can not increase my quality signal need help

[Jim-S]

i hit 97w galaxy 25 but i have only 25-29 q i try to adjusted and still the
same do i need another dish a 120cm, or a diferent lnb my is aviacom i buy the system from sadoun i don't know what to do know i can not increase my quality signal need help

Please verify what satellite you are on.
97w is Galaxy 19, and Galaxy 25 is 93.1w
Use www.Lyngsat.com to check.
Your dish is fine, do you have a sat. meter, you can fine tune the satellite in with it by moving the dish up and down, side to side, very very same amounts. I did this with mine it will enable you get good quality sig. You also can use the sig button on you remote to view the quality , which you are probably doing. I think all you have to do is a little tweeking.
If you have your switch inline try without it. Check all your connections, and what is your coax, is it good quality, and how long is it.

[branson]

the satelite is galaxy19 97w i have a swith and a sat finder the sat finder show 9 1/2 db every time tha i move the dish side to side i lost the signal
and also i have signal amp for longer cables the cable is new i have a diseq 1.0 switch and a s-sm21h, i have video in amc 4 but no audio ,galaxy 25 audio and video, echo 119 video and audio, 123 w nothing

[Jim-S]

When you have your signal on your sat finder move your dishup or down slightly, this also will help tune in the signal.