Hello all,
I am working through learning fta, and I really enjoy it. I am not quite satisfied with just ku. If I had known at the beginning what I think I know now, I would have gone for c-band right off.
I live in central Ohio, kind of on the southeast side of central. I would like to see a c-band setup, and talk with someone who can help me figure out what I need to do.
Is anyone near me with one or more big dishes who would let me see how you have things set up?
thanks, charlie.
I am about a 100 miles or so south of you depends on what part of south east ohio you are in I am in North east Ky.you are more than welcome to look at my setup.
__________________
Rainman's Equipment
Undien 4600,DSR 922
Fortec Ultra, Satworks 3618
2 Fortec Mercury II
Fortec Classic NA
8.5' Orbitron polar C Ku dish
8.5' Birdview HH C Ku dish
100cm Fortec dish
90cm Fortec dish
2 DG-240 HH motors
Co Rotor II feed horn
Norsat 8515 C band lnb
Norsat 4506A Ku lnb
BSC-621-2 Lnbf
Invacom QPH-031 Lnbf
Invacom SNH-031 Lnbf
Fortec Fsku-v universal Lnbf
V-Box
I am running a C Band dish with a CorotorII that feeds both a 4DTV receiver and a DVB FTA receiver on C & Ku. You could go with a BSC type lnbf that would simplify things a bit. Kinda all depends on what you want to do. The motor went out on my 90cm dish but prior to that I was using the 90cm for Ku on the DVB receiver as it just worked easier. So when all was operational as desired the C Band dish was feeding C & Ku to the 4DTV receiver & C to the DVB receiver. The 90cm dish was feeding Ku to the DVB receiver.
__________________
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator
8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5
Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100
Motorola DSR922
Fortec Mercury II
Digital Stream HD1150.
I am about a 100 miles or so south of you depends on what part of south east ohio you are in I am in North east Ky.you are more than welcome to look at my setup.
Wow, I think I would like to see how you have all that hooked up and keep it straight? I am afraid it is way more than 100 miles though, my zip is 44629. Let me know what zip you are in so I can see how far you are away. Thanks,
Wow, I think I would like to see how you have all that hooked up and keep it straight? I am afraid it is way more than 100 miles though, my zip is 44629. Let me know what zip you are in so I can see how far you are away. Thanks,
I sent you a PM with my address.
__________________
Rainman's Equipment
Undien 4600,DSR 922
Fortec Ultra, Satworks 3618
2 Fortec Mercury II
Fortec Classic NA
8.5' Orbitron polar C Ku dish
8.5' Birdview HH C Ku dish
100cm Fortec dish
90cm Fortec dish
2 DG-240 HH motors
Co Rotor II feed horn
Norsat 8515 C band lnb
Norsat 4506A Ku lnb
BSC-621-2 Lnbf
Invacom QPH-031 Lnbf
Invacom SNH-031 Lnbf
Fortec Fsku-v universal Lnbf
V-Box
Linear Mode
