Announcement Announcement Module
Collapse
No announcement yet.
SG6100 DiSEqC HH Motor with 42mm and 50mm shafts Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • SG6100 DiSEqC HH Motor with 42mm and 50mm shafts

    Price: $75 plus S/H
    Order Here


    FEATURES:

    • 30% Faster than the SG2100
    • 25% Stronger than the SG2100
    • Fits all popular dish with 42mm tube, including Winegard
    • Special Design for any Receiver with DiSEqC 1.2
    • DiSEqC 1.3 / Go to X Functions Compatible
    • GoTo '0' Function
    • Only One Coaxial Cable Control
    • High Efficiency
    • Compact Structure
    • Ultra Low Noise
    • Zero Backlash Design
    • Easy Installation with LED readout on motor
    • New SMART Software for high resolution positioning
    • Manual EAST / WEST buttons
    • Antenna Anti-Skid Design
    • For Dish up to 1.4M
    • Main gear is high tech engineering nylon Plastic vs Steel gears
    Specifications:
    Compatible Receiver: Receiver with Diseqc 1.2 or Interface Box
    Antenna Size: 140 cm Max
    Speed: 2.5°/sec(at 13v)
    3.2°/sec(at 18V)
    Azimuth Angle: 80°East~80°West(160°)
    Elevation Angle: 25~75°
    Input Voltage: 13/18V DC
    Output Voltage: 13/18V DC
    Power Consumption: 100mA (Stand by)
    200mA(Normal)
    350mA(Max)
    Satellite Positions: 100 Positions
    Calibration Function: Yes(Goto 0°)

    Optional:

    50mm (2") Replacement Shaft (use it for bigger dishes 36"+). This shaft works for models SG6100, and SG2100 motors
    Attachment
    $15
    Attached Files
Working...
X