Fortec Lifetime, Stab h-h100, pansat 2x1 diseqc switch

[wildboys]

I have a Fortec Lifetime, Stab h-h100, pansat 2x1 diseqc switch and a universal lnb.I want to add a circular lnb to receive fta from nimiq 1 and 2,and echostar 119.Is it possible to add a second lnb and navigate the stab motor to hit the other 3 satellites.If so how would i set this up?my zipcode is 72764. latitude 36.2 longitude 94.2 w.thanks

[Sadoun]

When you add the DSS LNBF to your DiSEqC switch (let's say to port 2), then on the LifeTime receiver "Antenna Settings" menu select the DSS satellite you want to go to. Assign DiSEqC (port 2) to it, and use the DiSEqC 1.2 commands to move your dish to that satellit.