Nahuel 1

[Scott]

I have the Fortec Star 786 with a Stab motor. I have located all my satellites and downloaded them with the exception of one, Nahuel 1. I added in the transponders I found on Lyngsat but still get nothing. Do you have any suggestions as to what I am doing wrong? Thank you

where do you live ? Nauhel covers a part of the usa and its signal is not strong !
43= 1 m dish
41=1.20 m dish

[dtsexpert]

TV Libre, Canal 11 and Canal Luz Sat are the only 3 channels beamed to the US. I get all 3 fine in N. California.
Move your dish to AMC6, then move the dish East just a little bit.
Remember, you must have an universal ku lnbf in order to received these channels.
Fortec 786v3, Fortec 90cm dish, SG2100 h-h mount.
good luck
Michael

Originally Posted by Scott

I have the Fortec Star 786 with a Stab motor. I have located all my satellites and downloaded them with the exception of one, Nahuel 1. I added in the transponders I found on Lyngsat but still get nothing. Do you have any suggestions as to what I am doing wrong? Thank you

[Scott]

I live in Michigan and I have the 39" dish. so maybe that is why I am not getting it.

[Sadoun]

Also like Michael said, you will need a UNIVERSAL lnbf to get this channels.

Standard LNBF Freq Range: 11.700 - 12.200 GHz
Universal LNBF Freq Range: 10.700 - 12.750 GHZ

Good luck :wink: