12146MHz down-frequency channels

[abcd1234]

Hello,

For the past week I have been having problems receiving any channels on the 12146/5MHz down-frequency. I have the Fortec Star receiver (lifetime ultra). I am not sure if this problem is local to my receiver or indeed there are no channels to be received (I used to receive all the arabic channels on this frequency)

Any thoughts?

Thanks

[antare]

It will help if you tell us which satellite you are aiming at ?

[abcd1234]

Sorry about that.
It is the IA5 Ku band.

[elgemcdlf]

There was a posting that one of the mux's on T5 was moving and the tp settings were posted. Sadoun made the posting. Try the Arabic section of the forum or there is also a T5 only topic that is updated regularly. Have you tried a blind scan?

[abcd1234]

Thanks, I will check out the Arabic section for the posting.
I did try Powe Scan (simillar to blind scan), Advanced Scan & TP Scan.
I also deleted all the channels and tried the Power Scan again after turning the receiver off. All other channels (that use different frequencies) were found but nothing on the 12146MHz or 12145MHz.

[antare]

try aimed search on 12146V/sr 22000. i still have all those channels ok
your blind search may miss if your LNB is not tilted properly

[pictureon]

TP 12146 is working OK. Try to check your signal on that transponder (TP manual scan)

[rainman]

still working here.

[abcd1234]

Thanks guys, I got it fixed.
It was the dish afterall.

[rainman]

Originally Posted by abcd1234

Thanks guys, I got it fixed.
It was the dish afterall.

great glad to here it.