factory setting

batmam · #1 (**permalink**) 10-10-2005, 08:32 PM

my fortec star lifetime ultra receiver /was full ,mot would not move disk ant.went to factory setting to correct prob.now after scaning ,it come up,andsay[ no data]can any one help fix this pro.

batmam · #2 (**permalink**) 10-19-2005, 07:52 PM

Quote:

Originally Posted by batmam

my fortec star lifetime ultra receiver /was full ,mot would not move disk ant.went to factory setting to correct prob.now after scaning ,it come up,andsay[ no channel data]can any one help fix this pro.

do i need to down chan.data

satnutwillb · #3 (**permalink**) 10-19-2005, 11:05 PM

I don't Know if this is the problem or not,but I believe I've read something about others saying deleting some tps. off each satellite solved some problems like that.Hope this helps.Ooops,I see where you have already did factory reset.Someone else may have the answer.Good luck.

Admin · #4 (**permalink**) 10-19-2005, 11:46 PM

Try doing a Factory reset again and when you are asked to enter the reset password use 1668.

TOCKCC · #5 (**permalink**) 10-21-2005, 06:10 PM

I have had problems in the past when I had too many transponders . I now delete all transponders but one on each satellite and have had no more problems.

Tom

batmam · #6 (**permalink**) 10-21-2005, 09:57 PM

thanks for the input ;i did the code 1668 for factory setting .but no result still get no channel data .removed some tps .no reesult. i notest on the front panel.it should have program number after pressing on button,only [on ] is displayed on screen/keep those fixes acoming in. thank you all [[this all happen at i did factory setting]