LNB KU or DSS ?

Vic_seadog · #1 (**permalink**) 10-04-2005, 06:30 PM

Question:
Will standard ku LNB work with DSS (61.5 ; 110 or 119) ?
I'm thinking to get HH motor and not sure if one LNB is good enough.
Thanks :mozilla_cool:

bobkat · #2 (**permalink**) 10-04-2005, 08:11 PM

Quote:

Originally Posted by Vic_seadog

Question:
Will standard ku LNB work with DSS (61.5 ; 110 or 119) ?

Nope. You need a circular LNB.

kat

Vic_seadog · #3 (**permalink**) 10-04-2005, 08:52 PM

Thanks kat, which lnb should I use for Dish & T5 or 121 ?

bobkat · #4 (**permalink**) 10-04-2005, 09:03 PM

Use a linear LNB for T5; linear for 121 and circular for the other DishNetwork satellites. Also, please read this ---> http://www.sadoun.net/viewtopic.php?t=4865

kat

Vic_seadog · #5 (**permalink**) 10-04-2005, 09:30 PM

Thanks again, sorry will not do it anymore.

bobkat · #6 (**permalink**) 10-04-2005, 09:46 PM

You didn't do anything wrong... :mozilla_innocent:

I was just bringing the FORUM RULES to your attention before this thread started to involve questions that shouldn't be asked here.

kat

Vic_seadog · #7 (**permalink**) 10-05-2005, 08:32 AM

Would you know by any chance how to align AMC5, I'm in the area (43.1 N 079.1 W) and this satelite is my arc. If the Lnb freq. is 10750, which tp. should I look for.
Thanks

bobkat · #8 (**permalink**) 10-05-2005, 09:56 AM

You have to set your receiver to an active transponder. Check out this link ---> http://www.lyngsat.com/amc5.html

kat

Vic_seadog · #9 (**permalink**) 10-05-2005, 08:19 PM

Thanks kat