Loop out

lpgao939 · #1 (**permalink**) 10-01-2005, 11:24 PM

Hi, can anybody explain to me what it is "Loop out"?

Can I connect to another reciever from this port? and second one works independently?

pictureon · #2 (**permalink**) 10-02-2005, 01:32 AM

Loop out is used to connect a slave receiver. When you connect the loop out of the master receiver to the "lnb in" of the slave receiver you can get and change between all channels of the same polarity of the master receiver. Meaning if you have a channel that is on vertical frequency on the master receiver, you could get all channel on vertical frequencies on the slave receiver.

Another use for this is to pass the connection to another receiver connected to the dish with 22k switch controlled by FTA receiver.

lpgao939 · #3 (**permalink**) 10-02-2005, 07:22 AM

Thanks Pictureon,

To be clear do you mean on slave you can watch the channels only with same polatiry not any channel on the same satellite?

Second use is like this?
Loop out of master------22k switch-------LNB in of slaver

What is 22k switch? Is it same as DiSEqC?