Quote:
|
Originally Posted by djsassan
I am a starter in the world of dishes, so I got the basic motorized kit:
Lifetime Ultra
31" dish
Sm3D12 motor
.4db Ku Dual LNB
I tried the thing with the volume control, and every other button on the remote, and I am still unable to program towards W.
I thought I could hit Gol TV with the LNB I have.....please correct me if I am wrong, er, educate me sounds better.
Thanks!
|
Re volume control for e/w, strange, it works for me, although I tried it on a sat that was already set up.
Re the Gol .... Assuming that the .4db lnbf you have is like one of the universal lnbfs like
Sadoun sells, then you "might" be able to tune that channel in, but I wouldn't count on it. The Echo 8 sat you were referring to is a circularly polarized sat, while the lnbf you have is linear polarization. You can still get circular polarized signals, but they will be reduced in intensity, which isn't that important, because it is a very strong satellite. However with a linear lnbf, you can't separate the R vs L polarity signals, and unless there aren't any nearby signals of opposite polarity, you'll have a hard time. I've never tried that particular signal, but have occasionally been able to tune some CP signals, such as the NASA-TV channel on Echo 7, however it is much better to use a CP lnbf for these signals. You might be in luck though, depending on where you are located, because I see that the nearby signals at 12355 and 12326 are spot beam signals, that might possibly be weak in your location, but if not, they will probably interfere.
Anyway, it's possible, but not ideal.