Question about 921 receiver and fortec receiver

[Labgate]

Hello

I have a 1 meter dish with two lnb. One is universal and the other one circular. I have a diseqc switch to combine the two into a hh-100 motor and then the cable goes in the home.

I did connect the cable to my fortec receiver and then the output of the fortec receiver to the k/v input on my 920 receiver ( I saw on another post that I should put it in the "input from lnb" connector but when I do that I have no signal.

My problem is. Even if I go to a ku satellite like g4 at 99 degrees. shut down my fortec receiver and go in the 920 receiver it doesn't work. I get a signal of 32 and quality of 99 on transponder 7.

I also wanted to download channel maps because this receiver has only a2 and x7 satellites.

So how should I connect this and should it work or if I absolutely need a bud.

Best regards

Labgate

[Labgate]

Hello again

I should add that the dcii light never come up.

in my fortec receiver I have a signal so I'm on the right sat.

Labgate

[tdti1]

You can only get the maps on the 4dtv off of Galaxy-10 C-band. I'm sure if you look around you can find a free 10' dish and set it up with c/ku feedhorn and lnbs.

[Labgate]

Thank you

I'll look around. If someone is near Quebec city and wants to sell a 10 foot dish, I'm interested.

Labgate

[Labgate]

Hello again all

I will be able to download the maps


My question is :

With a 10 feet dish, what will I be able to get with my 921 receiver. I read that I could not subscribe to us channels.

Or should I buy a 920 or 922. I hope I did not do an error buying my 921.

Best regards

Labgate

[tdti1]

Well the 921 was made for Star Choice, so you can sub to there programming, if you want the usa channels then a 920/905/922 is needed.