I can't pull in Hispasat 30 W

DruzeTito · #1 (**permalink**) 10-28-2004, 05:38 PM

I am located in tampa, florida and I have 90 cm fortec dish with universal lnb. Also SG2100. I think I am tracking the arc perfectly getting good signals from AMC 5, my southern most, and G10R my western most. But i can't seem to get any signal from any hispasat TP beamed to america according to LyngSAT. I am primarily aiming for 12052 V but I only get 24 signal. It is frustrating. I maybe will put a pic up and see if you guys can decide if trees are in the way. thanks.

vj9999 · #2 (**permalink**) 10-28-2004, 06:24 PM

Are you sure you are tracking the whole arc properly or just the west part of it?

You should be able to get Hispasat and posibly Telstar 12.

I get Hispasat from Chicago area and have signal quality of 83% on that transponder.

DruzeTito · #3 (**permalink**) 10-28-2004, 08:03 PM

you know when I set up the motor I used just my southern most and western most. I figured if I tried to adjust my motor mount/dish elevation for the eastern most I would lose the good quality I had to the west. I can't get T12 unless I take out my motor and set the physical limits to max. So maybe I will try to do that and see.