i think is good for nothing!!!!!!!!!!!1

[pamblanco22]

hi you all, i beng trying to put my reciber 786n/a whit a fortec 36" dish and nothing i beng beging for help but nobody help me, i call sadoun , but no help , i was doing for a month almost, i redy to trough on the garbage, no even one chanel, i spend like 450 $ us dollar, for nothing, when i order they send me the wrong one , well is a long story, thats all folks :?

[dtsexpert]

Post your questions here, we'll try to help you out. What sat are you trying to aim at? Double check: dish azimuth/elevation, skew, active stranponders, LOF settings.
Michael

Originally Posted by pamblanco22

hi you all, i beng trying to put my reciber 786n/a whit a fortec 36" dish and nothing i beng beging for help but nobody help me, i call sadoun , but no help , i was doing for a month almost, i redy to trough on the garbage, no even one chanel, i spend like 450 $ us dollar, for nothing, when i order they send me the wrong one , well is a long story, thats all folks :?

[pamblanco22]

HI , I HAVE A 786N/A WHIT A SM3D12 HH MOTOR AND FORTEC 36" DIsh whit a fortec universal lnb, ok my latitud is 40.70 N AND my longitud is 73.74 W , i'm trying to look my thrue south , 180+14=194W ,somebody told me the i can use SBS6, well i trying to get that sat,with and without the motor and nothing,move the dish little by little every where no luck ,i have a compas , sat finder sf95 ,yesterday i was trying to get AMC5 without the motor,and i found signal red,on the reciber i star moving the sats and when i get to Echostar 5,8 the line turn green , i was happy a that moment but when i search for chanel, nothing no chanels,signal and quality was at 87,and 92 % i put the wright frecuency and at that time was 12:30 at knight and i said foooooooooorgetit ,and i whent to sleep,maybe you can help me out, thank you

[dtsexpert]

SBS6 i s your truesouth sat. Make sure:
1. Correct LOF: low 9750, high 10600.
2. Skew is at 0
3. Use an active transponder on SBS6 when tuning the dish:
11708, H, SR 4000.
4. Make sure mount/dish elevation are correct.
5. Pole must be perfectly vertical.
Once you get locked on SBS6, move your dish to furthest East and WEst sat. If you can get lock on SBS6, furthest East and WEst, you should get all the sats in between.
Please read the instruction of setting up h-h mount posted on Sadoun website.
Good luck
Michael
Note: Make sure the Satcontrol h-h mount is at 0 position when tuning the dish for SBS6. If not, you can use the Fortec receiver to move back to 0.

Originally Posted by pamblanco22

HI , I HAVE A 786N/A WHIT A SM3D12 HH MOTOR AND FORTEC 36" DIsh whit a fortec universal lnb, ok my latitud is 40.70 N AND my longitud is 73.74 W , i'm trying to look my thrue south , 180+14=194W ,somebody told me the i can use SBS6, well i trying to get that sat,with and without the motor and nothing,move the dish little by little every where no luck ,i have a compas , sat finder sf95 ,yesterday i was trying to get AMC5 without the motor,and i found signal red,on the reciber i star moving the sats and when i get to Echostar 5,8 the line turn green , i was happy a that moment but when i search for chanel, nothing no chanels,signal and quality was at 87,and 92 % i put the wright frecuency and at that time was 12:30 at knight and i said foooooooooorgetit ,and i whent to sleep,maybe you can help me out, thank you