|
|
|||||||
| Fortec Star Discussions, Q&A about Fortec Star satellite receivers, LNBF, and dishes. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
07-16-2009, 10:54 PM
|
||||
|
||||
|
LNBF questions
1. If I want to combine the linear and circular LNBF's outputs into one coax, would a Disqc switch work? The LNBF is Invacom QPH-031.
2. Does the standard LNB recieve the same number of channels as a universal LNB? 3. My Fortec Classic NA is attached to a Universal LNBF. If I use the Invacom linear output which is STANDARD LNB, do I have to re-scan to see all my present channels? Thanks in advance.
__________________
Fortec Classic Lifetime NA, Fortec 90cm dish, Fortec Universal Ku LNB, Stab HH90 motor, 75ft coax. 
|
|
07-17-2009, 12:38 AM
|
||||
|
||||
|
1. Yes
2. Yes Diseqc switch is the type to use. Make sure your receiver is off every time you modify your cable attachments. 3. Probably not... you probably just have to change the input LNB type in the receiver setup. Good luck
__________________
VA 39N, 78W, Mercury II, Fortec 31", 36", 72", SG2100, DG-280, H180 (two DSR-922's sitting in a closet and to be the next project) HDTV TV with no pay tv.
|
|
07-17-2009, 08:48 AM
|
||||
|
||||
|
also a standard lnb won't received the channels with freq below 11700. you won't have to rescan just change your LO freq in your receiver.
__________________
Rainman's Equipment Undien 4600,DSR 922 Fortec Ultra, Satworks 3618 2 Fortec Mercury II Fortec Classic NA 8.5' Orbitron polar C Ku dish 8.5' Birdview HH C Ku dish 100cm Fortec dish 90cm Fortec dish 2 DG-240 HH motors Co Rotor II feed horn Norsat 8515 C band lnb Norsat 4506A Ku lnb BSC-621-2 Lnbf Invacom QPH-031 Lnbf Invacom SNH-031 Lnbf Fortec Fsku-v universal Lnbf V-Box I Like To Shop at Sadoun Satellite Sales.www.sadoun.com
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
