I have few questions/comments. I have
sg2100. I am able to lock in on satellites, but when I use usals it either takes it exactly where the satelite is or it moves totally off (and this is on attampts to move the dish to the sam satellite - so sometimes it works sometimes it doesnt)? MAybe I just need to play around with it a little bit more and figure it out.
One wierd thing, I moved it to SBS6 using usals and it locked in great (with 75% quality). I did blind search and once it finished blind search, when it goes to scan the frequencies that blind search found, the dish starts moving for no reason!?! Due to this it dodn't lock in on channels of course. It didn't move it a little bit, it moved 5+ degrees west by it self.
I hope I am doing something wrong
If not I'll stick to 1.2 and hope that does the trick.
On the blind search. I scanned t5, amc3 and sbs6. T5 had no problem, it found everything in about 8-10 minutes. AMC 3 went ok too, but it did lock up on me when I tried to tune in to
PBS HD. SBS6 took 17 minutes to search, it found 9 active frequencies.
All in all. I am satisfied. I need to play with it more and get used to it. Blind search looks nice. It has two long horizontal lines on the bottom and a little window where it writes out the results in top left. When you are searching, it is going in increments of 8 Mhz, and it indicates it by IF frequency. Once it finds frequency/SR it show it in the window. Also, it will put a little square (whose size is determined by it's SR) above the line where it found it.
So once I figure out all the little things (usals) the only complaint will be one gramatical error
It says ... transpnders founded instead of "found".
That's it from me. If
Sadoun or anybody else (I am guessing that even old lifetime users can help) can help me with few issues I had, I will greately appreciate it.
Thanks,
V
.png){kind=avatar}
ops: but it works perfect and is very compact.
