Mercury II - Two Moteck positioners - A/B Switch?

[bill190]

I have two separate dishes with 36v positioners. My Mercury II is moving one dish just fine using a Moteck positioner and DiSEqC commands.

So my question....

Can I get two Moteck positioners (one for each dish) and an A/B switch for the coax cable. Then have one dish be Ku, the other C band. Then set the satellite positions for the C band dish and Moteck positioner. Then switch to the Ku band dish and separate Moteck positioner (with coax cable A/B switch) and set the satellite positions for that.

Then be able to switch back and forth between C band and Ku band using the A/B switch?

i.e. Would this work? (The same satellite might be position number 321 for the Ku band positioner, but be position number 637 for the C band positioner.)