Hello everyone
Now that I have become more familiar with my system I have a question.
When I do a Full Scan on a satellite I think I am looking for new transpoters that migth have been added is this correct? Also when it finds a new transporter does the scan look for all the posible "sr" symbol rates
for the transporter? or do you have to input them manually?
Thanks in advance ..
I guess I had more than one question...
__________________
[FONT=Verdana][SIZE=2][URL="http://sadoun.com/Sat/Products/Fortec-Star/Receivers/Fortec-Star-CLASSIC-Blind-Search-receiver-New.htm"][COLOR=#0000ff]Fortec Star Lifetime [B]CLASSIC NA[/B] FTA Digital satellite receiver[/COLOR][/URL][/SIZE][/FONT]
[FONT=Verdana][SIZE=2][URL="http://sadoun.com/Sat/Products/S/SG2100-Digipower-hh-motor.htm"][COLOR=#0000ff]Digipower SG-2100 DiSEqC Motor[/COLOR][/URL][/SIZE][/FONT]
[FONT=Verdana][SIZE=2][URL="http://sadoun.com/Sat/Products/Fortec-Star/Dishes/FC080CM-31-inch-offset-ku-band-satellite-dish-antenna.htm"][COLOR=#0000ff]Fortec 36" FC90U Dish[/COLOR][/URL][/SIZE][/FONT]
[FONT=Verdana][SIZE=2][URL="http://sadoun.com/Sat/Products/Fortec-Star/LNBF/FSKU-v04-Fortec-Star-Universal-LNBF.htm"][COLOR=#0000ff]Fortec universal 0.4dB Single KU LNBF[/COLOR][/URL]. [/SIZE][/FONT]
It scans for everything BUT this does not always mean it finds everything. A perfect example is the WB channels on C Band. They must be manually put in even though a scan will find the transponder.
__________________
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator
8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5
Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100
Motorola DSR922
Fortec Mercury II
Digital Stream HD1150.
Linear Mode
