Need dish elev. & lnbf help also

[Viking62]

I have Fstar 36"-sadoun kul1 standard linear lnbf-SM3D22 motor-Neusat sp6000 preprogrammed box.
My lat=36.79
Long.= 92.77
southernmost=178 (with deviation)
Zip 65608 (22miles from loc.)

Settings--motor set @ 36
Dish set @ 39.1 (set with HH chart)
motor go to X @ 178 aimed @ Galaxy11 91W

Question--With given settings & lnbf -Am I on the right track?
And do I have to manually input tp-lnbf in recvr/it supports
go to X,USALS,Diseqc 1.2/1.3-c/ku reception.
Thank you in advance!

[boroda1]

Originally Posted by Viking62

Settings--motor set @ 36

36.79 more close to 37 than to 36, - I would do mu best to set it to 37
(and make sure the poll is plumb)

Originally Posted by Viking62

Dish set @ 39.1 (set with HH chart)
motor go to X @ 178 aimed @ Galaxy11 91W

Dish elevation may be subject to further adjustment.
Motor should be aimed at True South at it's "reference position", not to the satellite. True South is 175º on compass for your location.
Your "true south satellite" (the one you should start aiming first), is IA6 at 93ºW. TP 11876, V, SR 3516 has a strong signal.
Whenever you get a signal, do "blind scan", then compare channel info with lyngsat, it will let you know are you off or not.

[Viking62]

Thank you for reply & I will try this today. I appreciate the help.