A VIRGIN (to satellite) NEEDS HEEEELP

kostasgre · #1 (**permalink**) 09-01-2006, 01:15 PM

Helo every one
Iam new menber and satsfied costumer of this company GREAT JOB FAST DELIVERY
I just purchase the 90U dish,sg2100 motor,Invacom QPH031 LNB and 22KHZ swich.OK i have the dreambox 7020s never used yet .I need your help with the wiring connections for that swicth.I have 3 connectors left is LNCA (22KHz 13/18V) the midle is RX(s-sm21H) and the righit is LNCB (13/18v) Wich cables i connect to mach from the LNB L and C.And in wich order?. I KNOW U ALL LAPHING but i need help thank you all a poor dummy newbee

FORGOT my location is latitude 40.67 N longitude 74.00 W

rainman · #2 (**permalink**) 09-01-2006, 03:41 PM

I would use a disqec switch much easier to hook up 1 cable from lnb linear side to number 1 port on disqec switch. 1 cable from lnb circular side to port 2 on disqec switch. cable from disqec switch out port to motor. then from motor to receiver.

DruzeTito · #3 (**permalink**) 09-01-2006, 10:36 PM

Quote:

Originally Posted by kostasgre

I KNOW U ALL LAPHING but i need help thank you all a poor dummy newbee

Kalimero hows it going in Brooklyn man??

Just to let you know, NO ONE laughs here no matter what question. Were here to help.

kostasgre · #4 (**permalink**) 09-02-2006, 11:21 AM

rainmanI WILL TRY THIS
Hi DruzeTito KALIMERA

pmb1010 · #5 (**permalink**) 09-02-2006, 12:24 PM

I would attempt to leave the switch out for now, get the dish dialed in with 1 lnb connection (LNB L) and use this as your LINEAR connection.

Use USALS to get your motor to SBS6 and try to find Ohio News Network.

Once you do that, you can try to put the switch in and 22khz tone between LNB L and LNB C to see if it works.

DISEQC switch is easier to use, but you should be able to get a tone switch working, too.