reciver from U.A.E

madi4all · #1 (**permalink**) 08-07-2006, 04:55 PM

I Would Like To Know The Diffrent Between The Reciver From U.a.e Or Oman And The One We Using Here In The U.s.a Can I Bring Satlite Reciver Frome Home And Still Use It In The Usa..
And What Is The Signala Or How Can I Know The Right Location Of The Satile In Slc,utah For Easy Instalation..
Thank You For Your Help
Hamid........utah

boroda1 · #2 (**permalink**) 08-07-2006, 05:41 PM

Make sure it operates on 110-120V, and outputs NTSC signal

Check does it have a composite A/V Out

madi4all · #3 (**permalink**) 08-07-2006, 11:51 PM

Quote:

Originally Posted by madi4all

I Would Like To Know The Diffrent Between The Reciver From U.a.e Or Oman And The One We Using Here In The U.s.a Can I Bring Satlite Reciver Frome Home And Still Use It In The Usa..
And What Is The Signala Or How Can I Know The Right Location Of The Satile In Slc,utah For Easy Instalation..
Thank You For Your Help
Hamid........utah

HEY THANK YOU FOR STOPING BY I WANT TO ADD MORE INFORMATION HERE MAY BE IT CAN EASY TO GET HELP.

TYPE 1 X F-TYPE,IEC169-24 FEMAL
FREQUENCY RANGE 950 MHZ TO 2150 MHZ
I NPUT IMPEDANCE 75 OHM UNBALANCED
SINGAL LEVEL -25 TO -65
LNB POWER 13.5/18.5VC 5% 0.5 AMAX.OVERLOAD PROTECTED
22KHZ TONE FREQUENCY:22KHZ 2KHZ AMPLITUDE :0:V 0.2V
DISE QC CONTROL VERSION 1.2 COMPATIBLE
DEMODULATION QPSK
INPUT SYMOL RATE 2-45 MS/S
FEC DECODER CONVOLUTION CODE TAATE 1/2,2/3,3/4,5/6 AND 7/8 WITH CONSTANIT LENGTH K=7

madi4all · #4 (**permalink**) 08-07-2006, 11:58 PM

Quote:

Originally Posted by boroda1

Make sure it operates on 110-120V, and outputs NTSC signal

Check does it have a composite A/V Out

IM SORRY ......

....HOW TO GET THIS INFO...ITS ONLY TELL ME IN THE MENUAL THAT THE INPUT VOLTAGE IS AC90~240V,50HZ~60Z
FREQUENCY RANG 950MHZ TO 2150 MHZ....

THANK YOU

Colin 2905 · #5 (**permalink**) 08-08-2006, 12:59 AM

Quote:

Originally Posted by madi4all

And What Is The Signala Or How Can I Know The Right Location Of The Satile In Slc,utah For Easy Instalation..

Which satellite and what band? If it's Ku that you're receiving whilst in UAE / Oman then you can forget about receiving it in the USA. If it's C band, then it'll depend on the actual satellite and its footprint.

What you'll probably have to do is to see if the programming that you're interested in is carried on any satellites with US footprints.

Quote:

ITS ONLY TELL ME IN THE MENUAL THAT THE INPUT VOLTAGE IS AC90~240V,50HZ~60Z

OK, so it'll work pretty much worldwide, voltage-wise (you may need a physical adaptor or new mains cable if the sockets are different; I'm in Australia and don't know), but you still need to check what video standards it supports (eg; PAL, NTSC, SECAM, etc).

If you find that the programming that you want to view is available in the USA, you might be better off simply purchasing a new receiver locally.

boroda1 · #6 (**permalink**) 08-08-2006, 03:37 AM

Quote:

Originally Posted by Colin 2905

Which satellite and what band? If it's Ku that you're receiving whilst in UAE / Oman then you can forget about receiving it in the USA.

Why he cannot receive this american Ku band?
"950 MHZ TO 2150 MHZ" looks good for local Ku - band.
Hamid, what is your receiver brand/model?
Does it have a menu for "TV Settings" where you can choose between PAL and NTSC-M?
Can you post a picture of a back panel? Does it have these yellow, red and white connectors (RCA type)?

Colin 2905 · #7 (**permalink**) 08-08-2006, 04:14 AM

Quote:

Originally Posted by boroda1

Why he cannot receive this american Ku band?

Maybe I'm jumping to conclusions, but from past experience with questions like this I assumed that Hamid wants to receive the same satellite that he was receiving back in UAE or Oman. If that's the case, and it's on Ku, then that's what won't be possible.

So Hamid, are you trying to receive a specific satellite or simply a specific program? The more that you can tell us, the better.

wejones · #8 (**permalink**) 08-08-2006, 12:12 PM

Quote:

Originally Posted by Colin 2905

Maybe I'm jumping to conclusions, but from past experience with questions like this I assumed that Hamid wants to receive the same satellite that he was receiving back in UAE or Oman. If that's the case, and it's on Ku, then that's what won't be possible.
...

I see no reason why it would make any difference if the signal was C or Ku.

If Hamid wants to receive the "same satellite that he was receiving back in UAE", then I think the simple answer is NO, he can't do it, period, whether it was C or Ku. There is about a 160 deg difference in the 2 locations so they cannot see any of the same satellites, except for the moon. His receiver would probably be compatable with US satellites, but the programming he's looking for may not be available here, and his receiver may be outputting in PAL format. If he's expecting to see everything he saw back there, he probably can't.

boroda1 · #9 (**permalink**) 08-08-2006, 02:08 PM

Well, there are so many Arabic channels here FTA, that answer could be "Yes, he can"

Oman TV, for sure.

Colin 2905 · #10 (**permalink**) 08-08-2006, 07:32 PM

Quote:

Originally Posted by wejones

the simple answer is NO, he can't do it, period, whether it was C or Ku. There is about a 160 deg difference in the 2 locations so they cannot see any of the same satellites, except for the moon.

Doh! My mistake. For some reason I thought SLC was in the East.

Colin 2905 · #11 (**permalink**) 08-08-2006, 07:42 PM

Quote:

Originally Posted by boroda1

Well, there are so many Arabic channels here FTA, that answer could be "Yes, he can"

Oman TV, for sure.

We even get Oman TV on Ku in Australia. Sadly, FTA Ku here is a bit of a wasteland. Of the dozen or so Ku beams that I can receive, this is about as good as it gets....
http://www.lyngsat.com/optusb3.html