Do I need an additional positioner ?

[ReK]

I have a Hauppauge Nexus-s and SG2100, both are Diseqc compatible but I am concerned that the SG2100 will overload my Haupauge card.

So is there a box that I can put between the 2 to prevent overload on the card ?

[Sadoun]

Check this one http://sadoun.com/Sat/Products/STAB/MS110.htm

[ReK]

Originally Posted by Sadoun

Check this one http://sadoun.com/Sat/Products/STAB/MS110.htm

Now Im confused.

The Hauppage Nexus-s is diseqc compatible.


That sais the MS110 is for Recievers WITHOUT Diseqc protocol.

[Sadoun]

It works for both DISEQC 1.2 compatble and not-compatible receivers. It is independently powered!

What else did you have in mind for an interface? :?

[ReK]

Originally Posted by Sadoun

It works for both DISEQC 1.2 compatble and not-compatible receivers. It is independently powered!

Maybe you should include that in the description then, thanks for clarifying.

Originally Posted by Sadoun

What else did you have in mind for an interface? :?

I dint really know thats why I asked... I thought maybe the VBOX or DIGIBOX ?

Thanks again

[Sadoun]

OK

The VBOX, DIGIBOX, and the ASTON http://sadoun.com/Sat/Products/ASTON/DS200.htm are only for big dishes with 24V-36V actuator motors. It is not for an SG2100.

[ReK]

Originally Posted by Sadoun

OK

The VBOX, DIGIBOX, and the ASTON http://sadoun.com/Sat/Products/ASTON/DS200.htm are only for big dishes with 24V-36V actuator motors. It is not for an SG2100.

Ohhh ok. Thanks.

[ReK]

I had to follow up, I got the positioner from you guys and it does exactly as you said.

thanks !!