Need help

[videoduplicater]

dtsexpert,I have just purchased a fortec star ultra and a stb hh90 motor.I have never done anything with free to air stuff.This is the only forum I have read.I live in Toronto Canada.please guide me as to where should I start.I would love to learn as much as I can from you and this forum.I can
work with dishnet and direct tv,and am able to install them,and point the dish and whole shabang.
The dish I hve with fortec is 33 inches,rathaer large I have never handled these guys before,so here I am ready to give it a try.The motor looks
like another challenge.
I would also appreciate your help in answering the following,
I was given a free to air receiver,it has a name "SIGNAL" it is made in korea.I do not have the remote control for it.I can see the menu on my multi system tv in PAL syestem,Yes it came from Saudi Arabia.I believe it should have an option to change to north american tv system "NTSC"
I can't find any info on the net to see which remote would work with it.
I do need your help.

[dtsexpert]

Your question about the "signal" receiver, I can't answer that since I don't have that receiver.
Setting up a diseqc motor is a bit tricky but doable. Please read the instruction posted on Sadoun:
http://www.sadoun.com/Sat/Installati...stallation.htm
You will OK if you follow the steps correctly.
Feel free to post your questions/concerns here, other members and I will try to help you as much as we can
Michael

Originally Posted by videoduplicater

dtsexpert,I have just purchased a fortec star ultra and a stb hh90 motor.I have never done anything with free to air stuff.This is the only forum I have read.I live in Toronto Canada.please guide me as to where should I start.I would love to learn as much as I can from you and this forum.I can
work with dishnet and direct tv,and am able to install them,and point the dish and whole shabang.
The dish I hve with fortec is 33 inches,rathaer large I have never handled these guys before,so here I am ready to give it a try.The motor looks
like another challenge.
I would also appreciate your help in answering the following,
I was given a free to air receiver,it has a name "SIGNAL" it is made in korea.I do not have the remote control for it.I can see the menu on my multi system tv in PAL syestem,Yes it came from Saudi Arabia.I believe it should have an option to change to north american tv system "NTSC"
I can't find any info on the net to see which remote would work with it.
I do need your help.