Total greenhorn here, please be gentle! Using the Sat Look Angles Heading Calc linked on the site here to determine Long, Lat, Elev, etc. I'm a bit confused on what the little green and red pointer bubble(s) indicate? As well as the d=150.0 ft and h=103.1 ft. I'm assuming (big assumption) that's indicative of distance and height, but distance and height from what? Can anyone help
Not a clue but your angles are listed on the screen just above the sat view of your location. Perhaps at d from your location you need a rise of h. I did not take the time to figure out the angle of that to see if that makes sense.
__________________
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator
8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5
Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100
Motorola DSR922
Fortec Mercury II
Digital Stream HD1150.
Not a clue but your angles are listed on the screen just above the sat view of your location. Perhaps at d from your location you need a rise of h. I did not take the time to figure out the angle of that to see if that makes sense.
yep you are on the right track Steve.
__________________
Rainman's Equipment
Undien 4600,DSR 922
Fortec Ultra, Satworks 3618
2 Fortec Mercury II
Fortec Classic NA
8.5' Orbitron polar C Ku dish
8.5' Birdview HH C Ku dish
100cm Fortec dish
90cm Fortec dish
2 DG-240 HH motors
Co Rotor II feed horn
Norsat 8515 C band lnb
Norsat 4506A Ku lnb
BSC-621-2 Lnbf
Invacom QPH-031 Lnbf
Invacom SNH-031 Lnbf
Fortec Fsku-v universal Lnbf
V-Box
Not a clue but your angles are listed on the screen just above the sat view of your location. Perhaps at d from your location you need a rise of h. I did not take the time to figure out the angle of that to see if that makes sense.
Thanks for the info......figured it out with help of course..
d= distance to an obstacle from where you want to install your sat dish, and h=max height that obstacle can be without blocking line of sight to the satellite. Yes, I can see this hobby is going to be fun
Linear Mode
